Door stops wear out over time, which leads to the fact that the car doors do not lock well in the open position, and this can cause inconvenience when driving. You can repair the door stops on the Suzuki Grand Vitara yourself.
Necessary tools and materials
Before starting the repair, make sure you have all the necessary tools and materials:
- Door stop repair kit: usually includes plastic clips, compensation plates and special grease.
- Screwdrivers: you will need a Phillips and flat screwdrivers to remove the door trim and stop.
- Hex key: to unscrew the bolts securing the stop to the door.
- Lubricant: use the grease from the kit or PTFE grease to ensure smooth movement of the stop.
Repair process
- Removing the door trim: start by removing the door trim fasteners. Usually these are several screws and plastic latches that need to be carefully pried off so as not to damage the trim. After removing all fasteners, carefully separate the door trim from the door, starting from the bottom.
- Removing the door stop: Locate the door stop, which is attached to the car body with bolts. Use an Allen key or appropriate screwdriver to unscrew the bolts and remove the stop.
- Replacing worn parts: Remove the old plastic clips from the stop. They may be worn or broken.
- Install new clips from the repair kit in place of the old ones.
- Installing compensation plates: If the door locking still remains weak, use the compensation plates from the repair kit. They are installed between the lock and the limiter body and allow you to better fix the door in the open position.
- Lubrication: Apply the grease from the kit or PTFE grease to the moving parts of the stop. This will ensure smooth and silent door movement.
- Assembly: Install the stop in place, attaching it with bolts. Install the door trim back, securing it with all screws and latches.
Checking and completing the work
After completing the repair, check how the door works. It should open easily and remain fixed in several positions. If everything is done correctly, you should notice a significant improvement in the operation of the limiters. Repairing the door limiters on a Suzuki Grand Vitara is a fairly simple process that you can do yourself, saving money on visiting a car service. However, if you are not confident in your abilities, it is better to contact professionals.
Write a comment